HomeMy WebLinkAboutResolutions - No. 2014-132RESOLUTION NO. 2014-132
A RESOLUTION OF THE LODI CITY COUNCIL
APPROVING THE PURCHASE OF BUCKET TRUCK
FROM ALTEC INDUSTRIES, INC., OF DIXON
WHEREAS, the Electric Utility (EU) currently uses a 1997 model year truck that has been
utilized as a service vehicle for repair, maintenance, and construction activities of various critical
City systems such as, substations, fiber optic, and fixed -network assets; and
WHEREAS, the vehicle is used to haul material and test equipment, as well as personnel, to
and from job sites and has been in-service for 18 years; and
WHEREAS, in accordance with the City's Fleet Policy this vehicle is on the annual review
list, and the estimated cost to repair the vehicle exceeds its value, therefore staff recommends
replacement; and
WHEREAS, staff recommends the purchase of a 2015 Ford F550 4x2 Regular cab truck
with an Altec aerial device with material handling be made under the California Multiple Award
Schedule (CMAS); and
WHEREAS, per Lodi Municipal Code §3.20.045 as well as Fleet Policies and Procedures,
the bidding process may be waived when it is advantageous for the City to use contracts that have
been awarded by other California public agencies, provided that their award was in compliance with
their formally -adopted bidding or negotiation procedures; and
WHEREAS, staff recommends the purchase of the Altec bucket truck using CMAS Contract
Number 4-02-23-0013A, as specified in attached Exhibit A.
CMAS Price
Estimated Tax
Grand Total
$130,682
$10,781.27
$141,463.27
WHEREAS, procurement cost is estimated at $141,463.27, and available funding is
included in FY 2014/2015 Account No. 1611201.
NOW, THEREFORE, BE IT RESOLVED that the Lodi City Council does hereby authorize
the purchase of a 2015 Ford F550 4x2 Regular cab truck with an Altec aerial device with material
handling from Altec Industries, of Dixon, in an amount not to exceed $141,463.27.
Dated: August 6, 2014
I hereby certify that Resolution No. 2014-132 was passed and adopted by the City Council of
the City of Lodi in a regular meeting held August 6, 2014, by the following vote:
AYES: COUNCIL MEMBERS — Hansen, Johnson, Mounce, Nakanishi, and
Mayor Katzakian
NOES: COUNCIL MEMBERS — None
ABSENT: COUNCIL MEMBERS — None
ABSTAIN: COUNCIL MEMBERS — None
2014-132
#� Opportunity Number: 46647
Quotation Number: 256797
Altec Industries, Inc. CMAS Contract #: 4-02-23-0013A
GSA PIGGYBACK Date: 7/2/2014
Quoted for: City of Lodi
Customer Contact: Ed Fitzpatrick
Phone I Fax / Email: (209) 642-9653 / (209) 339-0851 / efitzpatrick@lodielectric
Quoted by: Michael Freeman
Phone: (707) 693-2514 Fax: (707) 678-1819 Email: Michael.Freeman@altec.com
Altec Federal Account Manager:
Altec Local Account Manager: Don Hildebrandt (530) 219-3373
plus
(Al.)GSA OPTIONS ON CONTRACT General
11 SPOT4 6 -point recessed LED strobe system $656
21 FE IFORD POWER EQUIPMENT (Power Locks and Power Windows) $933
31 1
GSA OPTIONS TOIAL: lil l b,949
IR 1 OPFN MORKFT ITFMA
1
UNIT
Delete Safety Harness
-$217
2
BODY
Custom LGSS with Tailshelf, Compartment Access Step, Class IV Receiver and D -Rings,
Vise Bracket Only, 34"L x 20"W x 8"H Punched Metal Box, Step Ladder Box, Nitrogen Bottle
Holder, 132"L x 20"W x 8"H Hotstick Box
$15,683
3
ELECTRICAL
LED FMVSS 108, Backup Camera System with 7" LCD Display
$1,485
4
CHASSIS
2015 Ford F550 4x2 Regular Cab 362 HP Gas Engine 6,500 Ib FAWR
-$4,834
51
OTHER
lFreight 1
2,500
61
DELIVERY
I Delivery FOB Customer Site 1
$116
OPEN MAKKt 1 11 tMS 1 U IAL: $14, /3:5
SUB -TOTAL FOR UNIT/BODY/CHASSIS: $130,682
QTY DISCOUNT(%1): $0
TOTAL FOR UNIT/BODY/CHASSIS: $130,682
**Pricing valid for 45 days**
NOTES
PAINT COLOR: White to match chassis, unless otherwise specified
WARRANTY: Standard Altec Warranty - One (1) year parts warranty One (1) year labor warranty Ninety (90) days warranty for travel charges
(Mobile Service) Limited Lifetime Structural Warranty. Chassis to include standard warranty, per the manufacturer. (Parts only warranty on
mounted equipment for overseas customers)
TO ORDER: To order, please contact the Altec Inside Sales Representative listed above.
CHASSIS: Per Altec Commercial Standard
DELIVERY: No later than 270-300 days ARO, FOB Customer Location
TERMS: Net 30 days
FET TAX: If chassis over 33K GVWR, a 12 % FET may be applied
BEST VALUE: Altec boasts the following "Best Value" features: Altec ISO Grip Controls for Extra Protection, Only Lifetime Warranty on
Structural Components in Industry, Largest Service Network in Industry (Domestic and Overseas), Altec SENTRY Web/CD Based Training,
Dedicated/Direct Gov't Sales Manager, In -Service Training with Every Order.
TRADE-IN: Equiptment trades must be received in operational condition (as initial inspection) and DOT compliant at the time of pick-up. Failure
to comply with these requirements, may result in customer bill -back repairs.
BUILD LOCATION: Dixon, CA
July 9, 2014
Our 85th Year
Ship To:
CITY OF LODI (CA)
ALTEC PARTS DISTRIBUTION
5610 CORPORATE DR
SAINT JOSEPH, MO 64507-2550
US
Attn:
Phone: 209-333-6763
Email: jhood@lodi.gov
Altec Quotation Number:
Account Manager:
Technical Sales & Support:
Item
256797-1
Don Hildebrandt
Michael Freeman
Description
Unit
Quote Number: 256797-1
Altec, Inc.
Bill To:
CITY OF LODI (CA)
PO BOX 3006
ATTN: ACCOUNTS PAYABLE
LODI, CA 95241-1910
United States
1. Altec Model AT40M Articulating Telescopic Aerial Device with a fiberglass upper boom
and fiberglass insulator in the articulating arm and a proportional joystick upper control
and toggle switches. Built in accordance to ALTEC's standard specifications and to
include the following features:
A. Ground to Bottom of Platform Height: 39.4 ft at 10.0 ft from centerline of rotation
(12mat3m)
B. Working Height: 44.4 ft (13.5 m)
C. Maximum reach to edge of platform: 29.6 ft at 16.3 ft platform height (9 m at 5 m)
D. Rotation: Continuous
E. Articulating Arm Articulation: -3 to 74 degrees. Insulator provides a minimum of
9.5 in (241.3 mm) of isolation.
F. Articulating arm is of a tubular steel structure. The articulating arm is designed so
that the articulating arm and tension link are compensating. By raising the
articulating arm only, the lower and upper boom maintain the same relative angle
with the ground. By raising the articulating arm in conjunction with the lower
boom, the operator is able to position himself more quickly and easily into the
work area.
G. Lower Boom Articulation: -25 to 75 degrees. Insulator provides a minimum of in (0
mm) of isolation.
H. Lower boom is a fabricated, reinforced steel box structure. Polyethylene outer
slide pads slide pads and Nylastron GSM inner slide pads are installed at the
boom tip to guide the telescopic upper boom. These pads have a large contact
area in order to reduce wear. The pads are shimmed and attached for ease of
adjustment or replacement without disassembly of the booms.
I. Telescopic upper boom is constructed of filament wound, square fiberglass,
providing a minimum of 31.5 inches (965 mm) of isolation. The inner surface of
the fiberglass boom is coated with polyurethane to provide a dry, smooth inner
surface, which will cause moisture to bead. The outer surface has a smooth
We Wish To Thank You For Giving Us The Pleasure
And Opportunity of Serving You
UTILITY EQUIPMENT AND BODIES SINCE 1929
Price
Page 1 of 11
I
Item Description
Quote Number: 256797 -1
Altec, Inc.
gelcoat finish.
J. The upper boom is extended and retracted by a double acting hydraulic cylinder
installed within the booms. The boom extends and retracts over slide bearings
located in the end of the lower boom.
K. Upper Controls: The upper controls system includes a proportional joystick upper
control and toggle switches.
L. Controls for Boom and articulating arm functions are controlled with a single
handle control. Control, through non-metallic linkages, actuates the interlock
section and four individual boom function valves. The control provides good
metering capability at all boom speeds. The single handle control activates Lower
Boom?Up and Down, Upper Boom?Extend and Retract, Rotation?
Clockwise/Counter-clockwise, and Articulating Arm?Raise and Lower. Unit rotation
is accomplished by moving the control from side to side similar to a tiller while
upper boom operation is accomplished by twisting the control handle clockwise to
retract and counter clockwise to extend.
M. Lower Controls: A lower control station includes and is located on the of the
turntable. A selector valve is provided to override the upper controls.
N. The platform is leveled by hydraulic leveling means, contained within the upper
boom and designed to maintain the dielectric integrity of the aerial device.
Controls for leveling and tilting the platform are located at the platform. Leveling
for the platform includes two double acting cylinders incorporating counterbalance
load holding valves to lock the platform in the event of hydraulic line failure.
Cylinders are located at the platform and at the end of the lower boom. The
master -slave action of the cylinders maintains a level platform throughout the full
range of boom articulation
O. Diagnostic Pressure Test Quick Disconnect Couplings: are located at the
turntable to allow a mobile service technician to quickly and easily attach a test
gauge to verify system and tool circuit pressure. This convenient troubleshooting
feature saves time and reduces the risk of high pressure oil sprays.
P. Tool circuit system relief pressure to be set to 2250 psi at 5.5 GPM.
Q. Unit meets or exceeds ANSI 92.2 standards.
2. Pedestal
3. Steel Reservoir, 15 gallon capacity, triangular, 17" L x 17" W x 24" H, and includes
breather caps and dipsticks
4. Single 1 -Man Platform, Fiberglass (Insulated), 24" x 30" x 42", End Mount, 180 Degree
Rotation, Platform -Mounted Single Handle Controls, ARM Jib
5. One (1) Platform Step - located on the side of the platform nearest the elbow in the
stowed position
6. Platform Cover - soft vinyl, 24 x 30 inches (610 x 762 mm)
7. Platform Liner - for one-man fiberglass platform, 24 x 30 x 42 inches (610 x 762 x 1067
mm), 50 kV rating (minimum)
8. Hydraulic Tool Circuit at Platform: One set of quick disconnect couplings at the boom tip
for open center tools. Tool system relief pressure set at 2,250 psi.
9. Engine Start/Stop & Secondary Stowage System: 12 VDC powered motor and pump
assembly for temporary operation of the unit in a situation wherein the primary hydraulic
We Wish To Thank You For Giving Us The Pleasure
And Opportunity of Serving You
UTILITY EQUIPMENT AND BODIES SINCE 1929
(Qtx Price
Page 2 of 11
Quote Number: 256797 -1
Altec, Inc.
Item Description 21y
source fails. Electric motor is powered by the chassis battery. This feature allows the
operator to completely stow the booms, platform, and outriggers. Secondary Stowage &
Start/Stop is activated with an air plunger at the plaform or momentary switch at the
lower control station and outriggers.
10. Jib Stick, 36" L, non -extension, non certified, grey in color
11. Slip Ring: Required for engine start/stop, secondary stowage system, and throttle control
options
12. Primary Modified A -Frame Outriggers With Integrated Subbase, fixed shoe, provides
112 inch (2844 mm) maximum spread. Includes motion alarm and outrigger interlocks,
which will not allow the unit to be operated until the outriggers have been deployed. For
installation on a 30 to 34 inch chassis frame height.
13. Electric Outrigger Controls: drive hydraulic outrigger control valves. Durable weather
proof electronic switches are located at the rear of the unit unless otherwise specified.
Use of electronic switches reduces the number of hydraulic hoses and leak points.
14. Lifting Eye - lifting eye at outer end of lower boom. Rated at 1,000lbs (454kg) lifting
capacity
15. Winch load line swivel hook
16. Altec Aerial Device Powder Painted White
Unit & Hydraulic Acc.
17. HVI-22 Hydraulic Oil (Standard).
18. Standard Pump For PTO
19. Electric Shifted PTO
20. Standard PTO/Transmission Functionality for Small Ford and Dodge Chassis
Body
21. Altec Body
22. Steel Body
23. Low -Side General Service With Step (LGSS)
24. Body Is To Be Built In Accordance With The Following Altec Standard Specifications
A. Basic Body Fabricated From A40 Grade 100% Zinc Alloy Coated Steel.
B. All Doors Are Full, Double Paneled, Self -Sealed With Built -In Drainage For
Maximum Weather -Tightness. Hinge Rods Extend Full Length Of Door.
C. Heavy -Gauge Welded Steel Frame Construction With Structural Channel
Crossmembers And Tread Plate Floor.
D. Integrated Door Header Drip Rail At Top For Maximum Weather Protection.
E. Fender Panels Are Either Roll Formed Or Have Neoprene Fenderettes
We Wish To Thank You For Giving Us The Pleasure
And Opportunity of Serving You
UTILITY EQUIPMENT AND BODIES SINCE 1929
1
1
1
1
1
1
1
25
1
1
1
1
1
1
1
Price
Page 3 of 11
Quote Number: 256797-1
Altec, Inc.
Item
Description
(0-tx Price
Mechanically Fastened.
F. Steel Treated For Improved Primer Bond And Rust Resistance.
G. Automotive Type Non -Porous Door Seals Mechanically Fastened To The Door
Facing.
25.
132" Estimated Body Length (Engineering To Determine Final Length)
1
26.
94 Inch Body Width
1
27.
40 Inch Body Compartment Height
1
28.
20 Inch Body Compartment Depth
1
29.
Finish Paint Body Altec White (Applies To Steel And Aluminum)
1
30.
Undercoat Body
1
31.
5 Inch Drop-in Metal Cargo Retaining Panel At Rear Of Body
1
32.
5 Inch Drop -In Metal Cargo Retaining Panel At Top Of Side Access Step
1
33.
All Locks Keyed Alike Including Accessories (Preferred Option)
1
34.
Custom Latch Style For Body Doors Eberhard Whale Tail Latch
1
35.
Gas Shock (Gas Spring) Rigid Door Holders On All Vertical Doors
1
36.
Chains On All Horizontal Doors
1
37.
Standard Master Body Locking System (Standard Placement Is At Rear. Sidepacks
1
With A Throughshelf/Hotstick Door At Rear, Standard Placement Is At The Front)
38.
Two Chock Holders In Fender Panel On Curbside Of Body
1
39.
1 st Vertical (SS) - Outrigger Housing, With Outrigger Pin Access As Needed
1
40.
Custom 1st Vertical (SS) Compartmentation 34"W, to include:
1
a. Locking Swivel Hooks On An Adjustable Rail (2-3-2)
41.
Custom 2nd Vertical (SS) Compartmentation 24"W, to include:
1
a. Two (2) Adjustable Shelves With Removable Dividers On 4 Inch Centers
42.
Custom 1st Horizontal (SS) Compartmentation 50"W x as high as possible, to include:
1
a. Two (2) 4 Inch High Pull -Out Drawers On Slides, As Wide As Possible, Latched, No
Dividers, Installed as High as Possible
b. Bottom of Compartment Vacant
43.
Custom Rear Vertical (SS) Compartmentation 24"W, to include:
1
a. Locking Swivel Hooks On An Adjustable Rail (2-2-2)
44.
1 st Vertical (CS) - Outrigger Housing, With Outrigger Pin Access As Needed
1
We Wish To Thank You For Giving Us The Pleasure
And Opportunity of Serving You
Page 4 of 11
UTILITY EQUIPMENT AND BODIES SINCE 1929
Quote Number: 256797 -1
Altec, Inc.
Item
Description(qty
Price
45.
Custom 1 st Vertical (CS) Compartmentation 34"W, to include:
1
a. Three (3) Adjustable Shelves With Removable Dividers On 4 Inch Centers
46.
2nd Vertical (CS) - Gripstrut Access Steps w/Two (2) Sloped Grab Handles, Vented
1
Chain/Battery Storage (Keyed Lock)
47.
Custom 1st Horizontal (CS) Compartmentation 50"W x as high as possible, to include:
1
a. Three (3) 4 Inch High Pull -Out Drawers On Slides, As Wide As Possible, Latched, No
Dividers, Installed as High as Possible
b. Bottom of Compartment Vacant
48.
Custom Rear Vertical (CS) Compartmentation 24"W, to include:
1
a. Three (3) Adjustable Shelves With Removable Dividers On 4 Inch Centers
Body and Chassis Accessories
49.
Custom Tailshelf 29" L Steel Tailshelf, Width To Match Body, to include:
1
a. cross storage drop down doors with whale tale paddle latches, one (1) curb side and
one (1) street side, keyed to match body
50.
Cable Step Installed At Rear, Single Step to include:
1
a. One (1) installed curb side
51.
Rubber Belted Step Mounted Beneath Side Access Steps (Installed To Extend Approx.
1
2" Outward)
52.
Compartment Top Access Step from Body Floor
1
53.
U -Shaped Grab Handle
2
54.
ICC (Underride Protection) Bumper Installed At Rear
1
55.
Set Of D -Rings for Trailer Safety Chain, installed one each side of towing device mount.
1
56.
Custom Towing Device Receiver Hitch, 2", Class IV
1
57.
Platform Rest, Rigid with Rubber Tube
1
58.
Boom Rest for a Telescopic Unit
1
59.
Outrigger Pad Holder, 20" L x 20" W x 3" H, Fits 19.5" x 19.5" x 2" And Smaller Pads,
2
Bolt -On, Bottom Washout Holes, 3/4" Lip Retainer
60.
Pendulum Retainers For Outrigger Pad Holders
2
61.
Plastic Outrigger Pad, 18" x 18" x 1", Black With Handle
2
62.
Wheel Chocks, Rubber with Metal Hairpin Style Handle, 9.75" L X 7.75" W X 5.00" H
1
We Wish To Thank You For Giving Us The Pleasure
And Opportunity of Serving You
Page 5 of 11
UTILITY EQUIPMENT AND BODIES SINCE 1929
1 k
Quote Number: 256797 -1
Altec, Inc.
Item
Description
(,qty Price
(Pair)
63.
Mud Flap Without Altec Logo (Pair)
1
64.
5 LB Fire Extinguisher With Light Duty Bracket, Installed
1
65.
Triangular Reflector Kit, Installed
1
66.
Rear Torsion Bar Installed On Chassis
1
67.
Slope Indicator Assembly For Machine With Outriggers
1
68.
Vise Mounting Bracket, 2 Square Tube Vertical Receiver Type with 8 x 8 Mounting Plate
1
installed rear of tailshelf street side
69.
Vinyl manual pouch for storage of all operator and parts manuals
1
70.
Additional Body/Chassis Accessory Punched Metal Box, 34"L x 20"W x 8"H, bolt on,
1
installed on curb side 1st Vertical
71.
Additional Body/Chassis Accessory Step Ladder storage box, 74"L x 20"W x 8"H, bolt
1
on, installed curb side over rear vertical and horizontal, to include:
a. Drop Down Door with slam paddle latch, keyed to match body
b. Treatplate top for walking surface
72.
Additional Body/Chassis Accessory Nitrogen Bottle Holder, installed curb side rear of
1
body in cargo bed, shall hold a 30" diameter bottle and include a ratchet strap
73.
Additional Body/Chassis Accessory Hotstick Box, 132"L x 20"W x 8"H, bolt on, installed
1
curb side compartment top, to include:
a. Divider centered lengthwise
b. Drop Down door at rear with paddle latch for access to inner half of box, keyed to
match body
c. Top Opening Lid, Treadplate for walking surface, Gas Props, Hasp Lock, And Grab
Handle
74.
Additional Body/Chassis Accessory Remove Rear seat(s) from chassis
1
Electrical Accessories
75.
Install secondary stowage system.
1
76.
Install Remote Start/Stop system in Final Assembly.
1
77.
Install Outrigger Interlock System
1
78.
Altec Standard Multi -Point Grounding System
3
79.
Lights and reflectors in accordance with FMVSS #108 lighting package. (Complete LED,
1
including LED reverse lights)
80.
6 -Position Strobe Lighting, Amber LED
1
We Wish To Thank You For Giving Us The Pleasure
And Opportunity of Serving You
Page 6 of 11
UTILITY EQUIPMENT AND BODIES SINCE 1929
Quote Number: 256797 -1
Altec, Inc.
Item Description (,qty Price
A. Two (2) Surface Mounted Lights in Front Grille
B. Two (2) Oval Grommet Mounted Lights on Body Side Panels
C. Two (2) Round Grommet Mounted Lights at Rear
81. Dual Tone Back -Up With Outrigger Motion Alarm 1
82. Altec Backup Camera System, 7" Color LCD Monitor, Heated Infrared Camera with 1
Day/Night Sensor and Audio
A. 7" Color LCD Monitor With LED Backlighting And Proximity Indicators
B. 2 Inputs With Independent Triggers
C. Heated Infrared Camera With Day/Night Sensor And Audio
D. Mirror/Normal View
E. IP68 Rated
F. Wide Viewing Angle (104 Degrees Horizontal x 78 Degrees Vertical)
G. 20 Meter Cable Assembly
83. PTO Hour Meter, Rectangular With 10,000 Hour Display 1
84. 6 -Way Trailer Receptacle (Pin Type) Installed At Rear 1
85. Dash panel rocker switches supplied with Ford Chassis, 4 auxiliary switches supplied in 1
up fitting package from Ford
86. PTO Indicator Light Installed In Cab 1
87. Power Distribution Module Is A Compact Self -Contained Electronic System That 1
Provides A Standardized Interface With The Chassis Electrical System. (Includes
Operator's Manual)
Finishina Details
88.
Non -Focus Factory Build 1
89.
Delivery Of Completed Unit 1
90.
Powder Coat Unit Altec White 1
91.
Finish Paint Body Accessories Altec White 1
92.
All interior body compartments to remain primed 1
93.
Altec Standard; Components mounted below frame rail shall be coated black by Altec. 1
i.e. step bumpers, steps, frame extension, pintle hook mount, dock bumper mounts,
D -rings, receiver tubes, accessory mounts, light brackets, under -ride protection,
etc.Components mounted to under side of body shall be coated black by Altec. i.e.
Wheel chock holders, mud flap brackets, pad carriers, boxes, lighting brackets, steps,
and ladders.
94.
Apply Additional Undercoating from behind the chassis cab to the rear of truck. 1
95.
Black Undercoating, Applied per Altec Standard 1
We Wish To Thank You For Giving Us The Pleasure
And Opportunity of Serving You Page 7 of 11
UTILITY EQUIPMENT AND BODIES SINCE 1929
Item Description
96. Apply Non -Skid Paint to all walking surfaces to include:
Quote Number: 256797 -1
Astec, Inc.
Chassis
104.
a. cargo bed
105.
b. Tailshelf
106.
c. Top Opening Box Lid
107.
d. Top of Ladder box
97.
English Safety And Instructional Decals 1
98.
Vehicle Height Placard - Installed In Cab 1
99.
Dielectric test unit according to ANSI requirements. 1
100.
Stability test unit according to ANSI requirements. 1
101.
Placard, HVI-22 Hydraulic Oil 1
102.
Inbound Freight 1
103.
Installation - AT40M 1
Chassis
104.
Chassis 1
105.
Altec Supplied Chassis 1
106.
2015 Model Year 1
107.
Ford F550 1
108.
4x2 1
109.
Chassis CA Length - 84" 1
110.
Regular Cab 1
111.
Chassis Color - White 1
112.
Ford Gas 6.8L 1
113.
362 HP Engine Rating 1
114.
Ford Torqshift 5 Speed Automatic Transmission (w/PTO Provision) 1
115.
GVWR 19,500 LBS 1
116.
Other Front Axle Rating 6,500 lbs 1
117.
Other Rear Axle Weight Rating 14,706 lbs 1
118.
225/70R19.5 Front Tire 1
119.
225/70R19.5 Rear Tire (Traction) 1
We Wish To Thank You For Giving Us The Pleasure
And Opportunity of Serving You
UTILITY EQUIPMENT AND BODIES SINCE 1929
Price
Page 8 of 11
Quote Number: 256797-1
Altec, Inc.
Item
Description
-0-ty
120.
Hydraulic Brakes
1
121.
Ford E/F250-550 Single Horizontal Right Side Exhaust
1
122.
No Idle Engine Shut -Down Required
1
123.
No California Emission Requirements
1
124.
Air Conditioning
1
125.
AM/FM Radio, Bluetooth 585 Radio: AM/FM Stereo/Single CD/MP3 (Fleet)
1
91 M SYNC Communications & Entertainment System
62D Steering Wheel Audio Cont
126.
Power Door Locks 90L Power Equipment Group
1
127.
Power Windows 90L Power Equipment Group
1
128.
Tilt Steering Wheel
1
129.
Other Interior Cab Options Driver and passenger power remote black heated convex
1
spotter folding manual extendable trailer outside mirrors - 90L Power Equipment Group
130.
Other Exterior Cab Options 18B 6" Angular Black Molded -in -Color Running Boards
1
131.
Vinyl Bucket Seat L Vinyl 40/Mini-Console/40 Front Seats - Bucket front seats with
1
adjustable head restraints
Miscellaneous
132. Standard Altec Warranty: One (1) year parts warranty, one (1) year labor warranty, 1
ninety (90) days warranty for travel charges, limited lifetime structural warranty
Altec Industries, Inc.
BY
Michael Freeman
Notes:
1 Altec Standard Warranty:
Price
Unit / Body / Chassis Total
FET Total
Total 130,682.00
We Wish To Thank You For Giving Us The Pleasure
And Opportunity of Serving You
UTILITY EQUIPMENT AND BODIES SINCE 1929
Page 9 of 11
Quote Number: 256797 -1
Altec, Inc.
One (1) year parts warranty.
One (1) year labor warranty.
Ninety (90) days warranty for travel charges.
Warranty on structural integrity of the following major components is to be warranted for so long as the
initial purchaser owns the product: Booms, boom articulation links, hydraulic cylinder structures, outrigger
weldments, pedestals, subbases and turntables.
Bidder is to supply a self-directed, computer based training (CBT) program. This program will provide
basic instruction in the safe operation of this aerial device. This program will also include and explain ANSI
and OSHA requirements related to the proper use and operation of this unit.
Altec offers its standard limited warranty with the Altec supplied components which make up the Altec Unit
and its installation, but expressly disclaims any and all warranties, liabilities, and responsibilities, including
any implied warranties of fitness for a particular purpose and merchantability, for any customer supplied
parts
Altec designs and manufactures to applicable Federal Motor Vehicle Safety and DOT standards
2 Altec takes pride in offering solutions that provide a safer work environment for our customers. In an effort
to focus on safety, we would like to ensure that the following items are offered to you as part of the
attached quotation package:
Outrigger pads (When Applicable)
Fall Protection System
Fire extinguisher/DOT kit
Platform Liner (When Applicable)
Back up alarm
Wheel Chocks
The aforementioned equipment is traditionally offered in our new equipment quotations, unless requested
otherwise by the customer. If you find that any of these items have not been listed as priced options in the
body of your quotation and are required by your company, we would encourage you to contact your Altec
Account Manager and have an updated quotation developed for you. These options must be listed as
individual options in the body of the quotation for them to be supplied by Altec.
Unless otherwise noted, all measurements used in this quote are based on a 40 inch (1016mm) chassis
frame height and standard cab height for standard configurations.
4 F.O.B. - Customer Site
5 Changes made to this order may affect whether or not this vehicle is subject to F.E.T. A review will be
made at the time of invoicing and any applicable F.E.T. will be added to the invoice amount.
6 Price does not reflect any local, state or Federal Excise Taxes (F.E.T). The quote also does not reflect any
local title or licensing fees. All appropriate taxes will be added to the final price in accordance with
regulations in effect at time of invoicing.
7 Interest charge of 1/2% per month to be added for late payment.
8 Delivery: 270-300 days after receipt of order PROVIDING:
A. Order is received within 14 days from the date of the quote. If initial timeframe expires, please contact
your Altec representative for an updated delivery commitment.
We Wish To Thank You For Giving Us The Pleasure
And Opportunity of Serving You
UTILITY EQUIPMENT AND BODIES SINCE 1929
Page 10 of 11
Quote Number: 256797-1
Altec, Inc.
B. Chassis is received a minimum of sixty (60) days before scheduled delivery.
C. Customer approval drawings are returned by requested date.
D. Customer supplied accessories are received by date necessary for compliance with scheduled delivery.
E. Customer expectations are accurately captured prior to releasing the order. Unexpected additions or
changes made at a customer inspection will delay the delivery of the vehicle.
Altec reserves the right to change suppliers in order to meet customer delivery requirements, unless
specifically identified, by the customer, during the quote and or ordering process.
9 Trade-in offer is contingent upon equipment being maintained to DOT (Department of Transportation)
operating and safety standards. This will include, but not limited to tires, lights, brakes, glass, etc. If a
trade-in is not maintained to DOT standards, additional transportation expenses will apply and could be
invoiced separately.
All equipment, i.e., jibs, winches, pintle hooks, trailer connectors, etc., are to remain with the vehicle unless
otherwise agreed upon in writing by both parties. Altec Industries reserves the right to re -negotiate its
trade-in offer if these conditions are not met.
Customer may exercise the option to rescind this agreement in writing within sixty (60) days after receipt of
purchase order. After that time Altec Industries will expect receipt of trade-in vehicle upon delivery of new
equipment as part of the terms of the purchase order.
Titles for trade-in equipment should be given to the appropriate Altec Sales associate or forwarded to Altec
Nueco at address 1730 Vanderbilt Road, Birmingham, AL 35234.
10 This quotation is valid until AUG 29, 2014. After this date, please contact Altec Industries, Inc. for a
possible extension.
11 After the initial warranty period, Altec Industries, Inc. offers mobile service units, in -shop service and same
day parts shipments on most parts from service locations nationwide at an additional competitive labor and
parts rate. Call 877-GO-ALTEC for all of your Parts and Service needs.
12 Please email Altec Capital at finance@altec.com or call 888-408-8148 for a lease quote today.
13 Please direct all questions to Don Hildebrandt at (707) 678-0800
We Wish To Thank You For Giving Us The Pleasure
And Opportunity of Serving You
UTILITY EQUIPMENT AND BODIES SINCE 1929
Page 11 of 11