HomeMy WebLinkAboutResolutions - No. 2013-199RESOLUTION NO. 2013-199
A RESOLUTION OF THE LODI CITY COUNCIL
AUTHORIZING THE CITY MANAGER TO APPROVE
THE PURCHASE OF REPLACEMENT ELECTRIC
UTILITY BUCKET TRUCK FROM ALTEC INDUSTRIES,
INC., OF ST. JOSEPH, MO
-------------------------------------------------------------------
-------------------------------------------------------------------
WHEREAS, the Electric Utility (EU) currently uses a 2000 Freightliner bucket
truck for maintenance and repair work in the field, including but not limited to, streetlight
repairs, service installations, and power line work; and
WHEREAS, many of these tasks involve the overhead electric distribution
system, therefore requiring the use of an aerial device; and
WHEREAS, this bucket truck has been in service since 2000, is past the end of
its ten-year useful life, and is currently budgeted for replacement in the EU's Fiscal Year
2013/14 capital equipment budget in the amount of $365,000; and
WHEREAS, the current trade-in value of this bucket truck is $30,000, which will
be applied toward the final purchase price; and
WHEREAS, Altec Industries, Inc. has provided a quote of $316,763 for a
replacement bucket truck, as attached in Exhibit A, which includes a purchase price of
$346,763 including delivery less $30,000 credit for the trade-in of the existing bucket
truck plus applicable taxes and licensing fees; and
WHEREAS, per Lodi Municipal Code, Section 3.20.045, State and Local Agency
Contracts, the bidding process may be waived when it is advantageous for the City, with
appropriate approval by the City Manager and City Council, to use contracts that have
been awarded by other public agencies, provided that their award was in compliance
with their formally -adopted bidding or negotiation procedures; and
WHEREAS, the proposed purchase is available on the California Multiple Award
Schedule (CMAS) Contract #4-02-23-0013A; and
WHEREAS, the estimated cost of $365,000, including taxes and fees with an
estimated ten-year service life, and funding is available and included in FY 2013/14
Account No. 1611201.
NOW, THEREFORE, BE IT RESOLVED that the Lodi City Council does hereby
authorize the City Manager to purchase a replacement electric utility bucket truck from
Altec Industries, Inc., of St. Joseph, Missouri, in the amount not to exceed $365,000
including taxes and document fees, including the trade-in of an existing bucket truck.
Dated: November 20, 2013
-------------------------------------------------------------------
-------------------------------------------------------------------
I hereby certify that Resolution No. 2013-199 was passed and adopted by the
City Council of the City of Lodi in a regular meeting held November 20, 2013, by the
following vote:
AYES: COUNCIL MEMBERS — Hansen, Johnson, Katzakian, Mounce,
and Mayor Nakanishi
NOES: COUNCIL MEMBERS — None
ABSENT: COUNCIL MEMBERS — None
ABSTAIN: COUNCIL MEMBERS — None
ND OHL-OLSON
lerk
2013-199
Exhibit A
^k // �/� Opportunity Number: 40605
'sk J��ilii .�iV Quotation Number: 233757
Altec Industries, Inc. CMAS Contract #: 4-02-23-0013A
Date: 9/26/2013
Quoted for: City of Lodi
Customer Contact: Barry Fisher
Phone: /Fax: /Email: 209-333-6817
Quoted by: Scott Kamler
Phone: 816-236-1360 /Fax: 816-236-1393/Email: soott.kamier@altec.com
Altec Account Manager: Don Hildebrandt
(Al.) GSA OPTIONS ON CONTRACT (General)
1 CG Cab Guard $2,399
2 TBE ELECTRIC TRAILER BRAKE CONTROLLER $222
3 VRI 120 Volt GFCI Receptacle, Includes Weather -Resistant Enclosure $195
4
5
(R-1 OPEN MARKET ITF_MS
1
AM855-E81
Articulating Overcenter Elevator Aerial Device in lieu of AM900-E100
$16,470
2
Line Body
Custom Service Line Body in lieu of Saddle Box and Flatbed
$12,516
3
Custom Unit
Additional Custom Unit Options
$3,628
4
Custom Inverter
PURE SINE WAVE INVERTER.3600 Watts Continuous. GFCI Outlet at Rear.
$3,439
5
Custom Chassis
International 7400 with 300 HP in lieu of Stock International Chassis
$8,898
61
Trade IN
Major Unit Trade In
-$30,000
71
Delivery
Delivery from Altec, St Joseph MO to Lodi CA
$4,375
SUB -TOTAL FOR UNIT/BODY/CHASSIS: $316,763
QTY DISCOUNT(%1):
TOTAL FOR UNIT/BODY/CHASSIS:
**Pricing valid for 45 days**
NOTES
PAINT COLOR: White to match chassis, unless otherwise specified
WARRANTY: Standard Altec Warranty - One (1) year parts warranty One (1) year labor warranty Ninety (90) days warranty for travel charges
(Mobile Service) Limited Lifetime Structural Warranty. Chassis to include standard warranty, per the manufacturer. (Parts only warranty on
mounted equipment for overseas customers)
TO ORDER: To order, please contact the Altec Inside Sales Representative listed above.
CHASSIS: Per Altec Commercial Standard
DELIVERY: No later than 270-300 days ARO, FOB Customer Location
TERMS: Net 30 days
FET TAX: If chassis over 33K GVWR, a 12 % FET may be applied
BEST VALUE: Altec boasts the following "Best Value" features: Altec ISO Grip Controls for Extra Protection, Only Lifetime Warranty on
Structural Components in Industry, Largest Service Network in Industry (Domestic and Overseas), Altec SENTRY Web/CD Based Training,
Dedicated/Direct Gov't Sales Manager, In -Service Training with Every Order.
TRADE-IN: Equiptment trades must be received in operational condition (as initial inspection) and DOT compliant at the time of pick-up. Failure
to comply with these requirements, may result in customer bill -back repairs.
BUILD LOCATION: St.Joseph, MO
October 8, 2013
Our 84th Year
209-333-6763
jhood@lodi.gov
CITY OF LODI (CA)
ALTEC PARTS DISTRIBUTION
5610 CORPORATE DR
SAINT JOSEPH, MO 64507-2550
US
Altec Quotation Number 233757-1
Account Manager: Don Hildebrandt
Inside Sales Rep: Scott Kamler
Item
Description
Unit
Quote Number: 233757-1
Altec, Inc.
Bill To:
CITY OF LODI (CA)
PO BOX 3006
ATTN: ACCOUNTS PAYABLE
LODI, CA 95241-1910
United States
Altec Sales Order(s):
1. AM855-E81 articulating overcenter elevator aerial device with an insulating lower arm,
insulating upper boom and the Altec ISO -Grip (U.S. Patent No. 7,416,053) system, an
upper control system incorporating high resistance components at the boom tip, for
installation over rear axle, built in accordance to ALTECS standard specifications and to
include the following features:
A. Ground to Bottom of Platform Height: 79.8 feet at 4.0 feet from centerline of
rotation (24.3 m at 1.2 m)
B. Working Height: 84.8 feet (25.8 m)
C. Maximum Reach to Edge of Platform with Upper Boom Overcenter: 46.8 feet
(14.3 m)
D. Maximum Reach to Edge of Platform with Upper Boom Non-overcenter and
Lower Boom at 100 degrees: 34.7 feet (10.6 m)
E. Double Elevator Design provides approximately 13 feet (4.0 m) of additional side
reach to the rear of the truck when the lower elevator arm is raised to its
maximum articulation and the upper elevator arm remains parallel to the truck.
F. Double Elevator: consists of two subframe mounted structural lifting members that
support the aerial device. The elevator base is installed over the rear axle
allowing the aerial device pedestal to be installed at the upper end of the elevator
or at the rear of the vehicle when in the stored position. This allows the
conventional storage of the aerial device booms over the chassis cab. The aerial
device pedestal remains parallel to the chassis regardless of the position of the
elevator. This is accomplished utilizing Elevator Links which form a parallelogram
with the subbase and the pedestal. The elevator mechanism is raised by dual,
double acting cylinders located on the elevator arms which remain in compression
at all times. In the travel position the cylinder rod is not exposed. The elevator
design allows for a cushion effect at each extreme of the cylinder travel. This
prevents the abrupt or hard jolt when the elevator is stored or when it reaches its
maximum elevation. The articulation range is 0 to 90 degrees on each of the
elevator arms. Bubble level indicators are installed at each outrigger control
location and at lower controls to permit the operator to level the chassis for
equipment operation. The elevator is controlled through a separate individual
control lever located at the platform controls and at the lower controls. The
platform control consists of a single lever with a selector for either upper or lower
elevator arm operation. Hydraulic system design permits operation of any three
boom functions simultaneously at full individual function speed if desired.
G. Pedestal and Turntable: Box structure design with large service openings, 1.25
inch (32 mm) top plate of pedestal and stiffened 1.25 inch (32 mm) bottom plate
of turntable machined after welding to provide a rigid, flat mounting surface for the
rotation bearing. This extends the life of the bearing and reduces life cycle cost.
Qty
Price
We Wish To Thank You For Giving Us The Pleasure
And Opportunity of Serving You Pagel of 10
UTILITY EQUIPMENT AND BODIES SINCE 1929
Quote Number: 233757 -1
® Altec, Inc.
Item Description
H. Rotation: Continuous rotation provided by worm gear drive, equipped with
extended shaft for manual rotation, driving a shear ball bearing rotation gear. The
fully adjustable rotation drive assembly includes an external eccentric ring
adjustment of the gearbox pinion gear to the main rotation bearing, permitting the
ability to easily adjust backlash, reduce boom side play and ensure proper tooth
contact over the life of the unit. This reduces life cycle cost.
I. Lift Cylinders: The rod eye is both thread and weld fastened to the rod while the
blind end of the cylinder is of cast steel, one piece design, which houses internal
(unexposed), cartridge -type, bi-directional counter -balance holding valves.
Self -aligning, spherical ball -type bushings are used at each end of the cylinder
J. Lower Boom: Fabricated, reinforced steel with a round centrifugally cast,
high-density fiberglass insulator. Insulator provides 24 inches (610 mm) of
isolation in the lower boom. The inner surface of the fiberglass insulator has a
wax coating molded in during manufacture to provide a dry, smooth inner surface
that will cause moisture to bead. The outer surface has a smooth gelcoat finish.
Lower boom articulation is 0 to 100 degrees
K. Lower Boom Stow Protection: To help prevent excessive down pressure by boom
structures when stowing.
L. Lower Boom Pivot Pin: high strength chrome plated steel with self-lubricating,
replaceable, non-metallic bearing.
M. Upper Boom: Round centrifugally cast, high density fiberglass, providing a
minimum of 150 inches (3810 mm) of isolation in the upper boom. The inner
surface of the fiberglass boom has a wax coating molded in during manufacture
to provide a dry, smooth inner surface that will cause moisture to bead. The outer
surface has a smooth gelcoat finish. Upper boom articulation is 0 to 230 degrees
N. Boom Linkage, Patented Walking Link: This design features uniform speed of
upper boom, and provides smooth, continuous, self-adjusting, low maintenance
operation.
O. Upper Boom Hold Down Device
P. Platform Leveling System: The platform is leveled by a single 0.5 inch (12.7 mm)
diameter leveling cable with fiberglass rods in upper and lower boom, designed to
maintain the dielectric integrity of the aerial device.
Q. Platform: Totally enclosed, fiberglass.
R. ISO -Grip System: The Altec ISO -Grip (U.S. Patent No. 7,416,053) System
includes the following boom tip components that can provide an additional layer of
secondary electrical contact protection. This is not a primary protection system.
Control Handle: A single handle controller incorporating high electrical resistance
components that is dielectrically tested to 40 kV AC with no more than 400
microampers of leakage. The control handle is green in color to differentiate it
from other non -tested controllers. The handle also includes an interlock guard
that reduces the potential for inadvertent boom operation. Auxiliary Control
Covers: Non -tested blue silicon covers for auxiliary controls. Control Console:
Non -tested non-metallic control console plate. Boom Tip Covers: Non -tested
non-metallic boom tip covers. The covers are not dielectrically tested, but they
may provide some protection against electrical hazards.
S. Lower Controls: Below rotation control station is located behind the chassis cab
on the curb side and contains the all of the necessary controls to operate the
aerial device. The control panel uses a separate lever for control of each of the
aerial device boom functions. The controls may be operated individually or in any
combination with fully proportional control. Each of the levers has a detent lock in
the neutral or centered position. Control lever to operate the elevator arm is
located with aerial device controls.
T. Control Purging System: Provisions for purging and replenishment of oil through
the control system for extreme cold weather operation and elimination of air from
control lines when servicing.
U. Outrigger/Boom Interlock System: Prevents boom from being unstowed until
outriggers have been at least partially deployed.
V. Outrigger/Unit Selector Control: Located near the outrigger controls, allows
(,qty Price
We Wish To Thank You For Giving Us The Pleasure
And Opportunity of Serving You Page 2 of 10
UTILITY EQUIPMENT AND BODIES SINCE 1929
Aft
"a' " LA
Item
Quote Number: 233757 -1
Altec, Inc.
Description
operator to divert hydraulic oil from machine circuit for outrigger operation. This
reduces the potential for inadvertent outrigger movement during machine
operation if outrigger controls are bumped.
W. Outrigger Motion Alarm: Provides audible alarm when any of the outriggers are in
motion.
X. Back-up Alarm, installed
Y. ISO 9001: This aerial device is designed and manufactured in a facility that is
certified to meet ISO 9001 requirements.
Z. Manuals: Two (2) Operators and two (2) Maintenance/ Parts manuals containing
instructional markings indicating hazards inherent in the operation of an aerial
device.
AA. Paint: Painted white with the Altec Powder Coat Paint Process which provides a
finish -painted surface that is highly resistant to chipping, scratching, abrasion and
corrosion. Paint is electro -statically applied to the inside as well as outside of
fabricated parts then high temperature cured prior to assembly ensuring
maximum coverage and protection
2. 999 - Automatic Hydraulic Upper Boom Stow. Requires no action on the part of the
operator. Upper boom is automatically released when booms are moved. Ensures that
upper boom is properly restrained for road travel. Requires no action on the part of the
operator. Upper boom is automatically released when booms are moved. Ensures that
upper boom is properly restrained for road travel.
3. 215 Single two man side mounted platform with hydraulically extended jib and winch.
Platform is 24 x 48 x 42 inches high (610 x 1219 x 1067 mm), rated at 700 pounds
(317.5 kg) capacity, and rotates hydraulically 90 degrees to the end of the boom.
4. 255 Platform cover for two-man, side -mounted platform, soft vinyl, 24 x 48 inches (610 x
1219 mm)
5. 259 Platform liner for single two-man, side -mounted fiberglass platform, 24 x 48 x 42
inches (610 x 1219 x 1067 mm), 50 kV rating (minimum)
6. 295 Remote secondary stowage system, 12 VDC electric powered. Includes pump and
continuous duty motor, operates from chassis battery. Control is captive air operated
from the platform and toggle switch operated from the lower controls. This option allows
the operator to completely stow the booms, platforms and jib/winch in a situation
wherein the primary hydraulic source fails. (Engine start/stop is not included) and
310 -Remote Engine Start/Stop, Captive Air. (Code 315)
Locate both at each - one (1) at each platform, one (1) at lower controls and
one (1) at each outrigger controls at rear.
7. 246 -Outrigger, Radial 175 inches (4445 mm) of maximum spread
8. Outrigger, Primary and Auxiliary, Radial - provides 175 inch (4445 mm) spread at
maximum penetration.
9. 322 -Category B, 69 kV and below
10. Powder coat unit Altec White.
11. Additional Unit Option Coaxial cables and hardware installed in boom for future
addition of EHV kit (does NOT include external components for EHV kit
such as corona ring, leakage monitor, aluminum liners, etc.).
12. Additional Unit Option Two (2) sets of Snap-Tite hydraulic couplers locate at the
platforms. Male coupler: 23 -N6 -F, Female: 23-IC6-6F.
EN
Price
We Wish To Thank You For Giving Us The Pleasure
And Opportunity of Serving You Page 3 of 10
UTILITY EQUIPMENT AND BODIES SINCE 1929
Item Description
13. Additional Unit Option Hydraulic platform tilt at lower controls.
14. Additional Unit Option Continuous Purge
Quote Number: 233757 -1
Altec, Inc.
Unit & Hydraulic Acc.
15. AM800 Double Elevator Subbase Weldment
16. Reservoir, 50 Gallon, 48"L X 24"H X 10"W
A. Internal return filter, 10 micron absolute, fiberglass media.
B. Ball valves in suction and return lines.
C. Magnetic suction strainer.
D. Filler/breather cap with dipstick.
17. HVI-22 Hydraulic Oil (Standard).
18. Standard Pump For PTO
19. Hot shift PTO for automatic transmission
20. Muncie PTO (Altec Standard)
21. Standard PTO/Transmission Functionality for Automatic Transmissions -
If chassis is in gear, and PTO switch is activated, PTO will not engage. Chassis will
remain in gear. If chassis is already in neutral with PTO engaged and operator tries to
shift into gear, PTO will disengage and transmission will shift into gear.
22. Hook, Material Handling, 1 -Ton With Latch, Installed On End Of Aerial Winch Line
Body
23. Altec Body
24. Steel Body
25. Aerial Bobtail Service Line (ABSL)
26. Approximate Body Length (Engineering to Determine Final Length) Suitable for Chassis
with Usable CA: 186.90, approx 220"
27. 94 Inch Body Width
28. 46 Inch Body Compartment Height
29. 18 Inch Body Compartment Depth
30. Finish Paint Body Altec White (Applies To Steel And Aluminum)
31. Undercoat Body
32. 2 Inch x 4 Inch Drop -In Wood Cargo Retaining Board At Rear Of Body
33. Gripstrut On Streetside Compartment Tops
34. Gripstrut On Curbside Compartment Tops
35. Stainless Steel Rotary Paddle Latches With Keyed Locks
We Wish To Thank You For Giving Us The Pleasure
And Opportunity of Serving You
UTILITY EQUIPMENT AND BODIES SINCE 1929
1
1
55
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1'
1
1
Price
Page 4 of 10
reC='J)VtW Quote Number: 233757 -1
3rd Vertical (SS) - Adjustable Shelf With Removable Dividers On 4 Inch Centers 2
® Altec, Inc.
4th Vertical (SS) - Adjustable Shelf With Removable Dividers On 4 Inch Centers 2
51.
1st Horizontal (SS) - Fixed Shelf With Removable Dividers On 8 Inch Centers 1
52.
Item
DescriptionG�yt
Price
36.
Gas Shock (Gas Spring) Rigid Door Holders On All Vertical Doors
1
37.
Chains On All Horizontal Doors
1
38.
Standard Master Body Locking System (Standard Placement Is At Rear. Sidepacks
1
3rd Vertical (CS) - Adjustable Shelf With Removable Dividers On 4 Inch Centers 3
With A Throughshelf/Hotstick Door At Rear, Standard Placement Is At The Front) Locks
4th Vertical (CS) - Adjustable Shelf With Removable Dividers On 4 Inch Centers 3
60.
will be at the rear set inboard to clear radial outriggers.
61.
39.
One Chock Holder On Each Side of Body With Retaining Lip In Fender Panel (Rear Of
1
Wheel Or Opposite Fuel Fill)
40.
Hotstick Shelf Extending From Rear Of First Vertical To Rear Of Body On Streetside
1
41.
Two Hotstick Brackets On Streetside
1
42.
Standard Drop-Down Hotstick Door For One (1) Shelf On Streetside, Stainless Steel
1
Slam Paddle Latch With Keyed Lock
43.
1 st Vertical (SS) - Locking Swivel Hooks On An Adjustable Rail - Left Wall
2
44.
1 st Vertical (SS) - Locking Swivel Hooks On An Adjustable Rail - Rear Wall
4
45.
1st Vertical (SS) - Locking Swivel Hooks On An Adjustable Rail - Right Wall
2
46.
2nd Vertical (SS) - Locking Swivel Hooks On An Adjustable Rail - Left Wall
2
47.
2nd Vertical (SS) - Locking Swivel Hooks On An Adjustable Rail - Rear Wall
4
48. 2nd Vertical (SS) - Locking Swivel Hooks On An Adjustable Rail - Right Wall 2
49.
3rd Vertical (SS) - Adjustable Shelf With Removable Dividers On 4 Inch Centers 2
50.
4th Vertical (SS) - Adjustable Shelf With Removable Dividers On 4 Inch Centers 2
51.
1st Horizontal (SS) - Fixed Shelf With Removable Dividers On 8 Inch Centers 1
52.
2nd Horizontal (SS) - Fixed Shelf With Removable Dividers On 8 Inch Centers 1
53.
Custom 1st Vertical (CS) Compartmentation Operators Station 1
54.
2nd Vertical (CS) - Locking Swivel Hooks On An Adjustable Rail - Left Wall 2
55.
2nd Vertical (CS) - Locking Swivel Hooks On An Adjustable Rail - Rear Wall 4
56.
2nd Vertical (CS) - Locking Swivel Hooks On An Adjustable Rail - Right Wall 2
57.
2nd Vertical (CS) - Louvered Panel On Rear Wall To Ventilate Compartment 1
58.
3rd Vertical (CS) - Adjustable Shelf With Removable Dividers On 4 Inch Centers 3
59.
4th Vertical (CS) - Adjustable Shelf With Removable Dividers On 4 Inch Centers 3
60.
1 st Horizontal (CS) - Adjustable Shelf With Removable Dividers On 8 Inch Centers 2
61.
2nd Horizontal (CS) - Adjustable Shelf With Removable Dividers On 8 Inch Centers 2
Body and Chassis Accessories
We Wish To Thank You For Giving Us The Pleasure
And Opportunity of Serving You Page 5 of 10
UTILITY EQUIPMENT AND BODIES SINCE 1929
Quote Number: 233757 -1
® Altec, Inc.
Item Description 9-t C Price
62.
36" L Steel Tailshelf, Width To Match Body Steel Tailshelf, Handle valve guards and 1
covers, light channel
63.
3" Fixed Retaining Rail On Sides And Rear With Corner Wash -Out 1
64.
Custom Material Retainer On Tailshelf 3 RECESSED D RINGS AT TAILSHELF, 18" 1
FROM REAR, ONE ON EACH SIDE AND ONE IN CENTER.
65.
Cabguard Required, Mounted on Front Bumper Custom retaining rail on cabguard, exact 1
dimensions will be submitted at PAM review. Pictures in file.
66.
Cable Step Installed At Rear, Single Step Installed SS rear. 1
67.
Rigid Step Mounted Beneath Side Access Steps (Installed To Extend Approx. 2" 1
Outward) Under Operators platform
68.
Compartment Top Access Step from Body Floor 2
69.
Platform Access Step From Top of Body Compartment 2
70.
U -Shaped Grab Handle installed on SS rear of tailshelf for three point contact when 2
using step at SS rear.
71.
ICC (Underride Protection) Bumper Installed At Rear 1
72.
Dock Bumpers (Pair), Fixed Mounting (Rectangular Bumper), Installed At Rear Frame 1
Rails So They Are The Furthest Point Back
73.
T-125 Style Pintle Hitch (30,000 LB MGTW with 6,000 LB MVL) 1
74.
Set Of Eye Bolts for Trailer Safety Chain, installed one each side of towing device 1
mount.
75.
Glad Hands At Rear, Straight Type 1
76.
Platform Rest, Rigid with Rubber Tube 2
77.
Lower Boom Rest Weldment 1
78.
Outrigger Pad, 24" x 24" x 3", Wood With Rope Handle 4
79.
Outrigger Pad Holder, 25" L x 25" W x 5" H, Fits 24.5" x 24.5" x 4" And Smaller Pads, 4
Bolt -On, Bottom Washout Holes, 3/4" Lip Retainer
80.
Pendulum Retainers For Outrigger Pad Holders 4
81.
Wheel Chocks, Rubber with Metal Hairpin Style Handle, 9.75" L X 7.75" W X 5.00" H 1
(Pair)
82.
Mud Flaps With Altec Logo (Pair) 1
83.
Triangular reflector and flare kit, Installed. Contains 3 reflectors and 3 fuses (20 Minutes 1
Each). shipped loose.
84.
5 LB Fire Extinguisher With Light Duty Bracket, Installed 1
85.
Slope Indicator Assembly For Machine With Outriggers 1
86.
Vinyl manual pouch for storage of all operator and parts manuals 1
We Wish To Thank You For Giving Us The Pleasure
And Opportunity of Serving You Page 6 of 10
UTILITY EQUIPMENT AND BODIES SINCE 1929
Quote Number: 233757 -1
Altec, Inc.
Item Description -0-ti
87. Additional Body/Chassis Accessory Bolt on front frame extensions for International 1
7400
Electrical Accessories
88.
Install Outrigger Interlock System 1
89.
Altec Standard Multi -Point Grounding System 7
90.
Copper U Shaped Grounding Lug (Threaded) to be installed at CS front and CS rear of 2
104.
vehicle.
91.
Lights and reflectors in accordance with FMVSS #108 lighting package. (Incandescent) 1
92.
Altec Standard Amber LED Strobe Light With Brush Guard installed on cabguard, one 2
each side, streetside and curbside rear corners.
93.
Dual Tone Back -Up With Outrigger Motion Alarm 1
94.
3600 Watt Pure -Sine Wave Inverter (120 And 240 VAC Capable) Curbside 2nd vertical, 1
off floor on risers.
95.
120 Volt GFCI Receptacle Includes Weather -resistant Enclosure Installed in CS rear 1
107.
tailshelf in light channel.
96.
7 -Way Trailer Receptacle (Pin Type) Installed At Rear 1
97.
Relocate Trailer Receptacle Supplied With Chassis 1
98.
Electric Trailer Brake Controller Activator II (DrawTite #5500) put control in cab. 1
99.
Altec Modular Panel System (AMPS) - Includes Mounting Panel and Accessory 1
Switches
100.
PreWire Power Distribution Module (Includes Operators Manual) 1
Finishina Details
101.
Focus Factory Build 1
102.
Delivery Of Completed Unit 1
103.
AM855-E81 FA Installation 1
104.
Powder Coat Unit Altec White 1
105.
Finish Paint Body Accessories Altec White 1
106.
Altec Standard; Components mounted below frame rail shall be coated black by Altec. 1
i.e. step bumpers, steps, frame extension, pintle hook mount, dock bumper mounts,
D -rings, receiver tubes, accessory mounts, light brackets, under -ride protection,
etc.Components mounted to under side of body shall be coated black by Altec. i.e.
Wheel chock holders, mud flap brackets, pad carriers, boxes, lighting brackets, steps,
and ladders.
107.
Apply Non -Skid Paint to all walking surfaces 1
108.
English Safety And Instructional Decals 1
Price
We Wish To Thank You For Giving Us The Pleasure
And Opportunity of Serving You Page 7 of 10
UTILITY EQUIPMENT AND BODIES SINCE 1929
Quote Number: 233757 - 1
,ram."Atec, Altec, Inc.
Item Description City Price
109. Vehicle Height Placard - Installed In Cab 1
110. Dielectric test unit according to ANSI requirements. 1
111. Stability test unit according to ANSI requirements. 1
112. Placard, HVI-22 Hydraulic Oil 1
Chassis
113.
Chassis 1
114.
Altec Supplied Chassis 1
115.
2014 Model Year 1
116.
International 7400 SBA 1
117.
6x4 Tandem Axle 1
118.
Other Chassis Cab To Axle Length 189" 1
119.
Conventional Cab 1
120.
Chassis Color - White NAV9036 1
121.
Other Chassis Wheelbase Length 258 1
122.
Maxxforce DT 1
123.
Other HP Rating 300 HP 1
124.
Allison RDS -3500 Automatic Transmission 1
125.
GVWR 60,000 LBS 1
126.
20,000 LBs Front Axle Rating 1
127.
40,000 LBs Rear Axle Rating 1
128.
425/65R22.5 Front Tire 1
129.
11 R22.5 Rear Tire 1
130.
Air Brakes 1
131.
Single Vertical Exhaust With Horizontal Muffler Right Hand 1
132.
12VZA - International PTO Throttle Wiring 1
133.
International Heavy Duty Tail Light Wiring (08HAB) 1
134.
International Transmission Dipstick Relocated to RH Side Of Transmission (13WGH) 1
135.
International - Prewire chassis (8HBE) 1
136.
No Idle Engine Shut -Down Required 1
137.
50 Gallon Fuel Tank Left Hand 1
We Wish To Thank You For Giving Us The Pleasure
And Opportunity of Serving You Page 8 of 10
UTILITY EQUIPMENT AND BODIES SINCE 1929
rMe'l)Vh3c Quote Number: 233757 - 1
® Altec, Inc.
Item Description (Qty Edo
138. 120,000 Yield Strength (PSI) 1
139. Glad Hands 1
140. Towing Package
141. Other Seat Options 16JDY SEAT, DRIVER (Gra-Mag) Non -Suspension, High Back With
Integral Headrest,
Vinyl, With Fixed Back
016PHJ SEAT, TWO-MAN PASSENGER {Gra-Mag) Fixed Back, Two Integral Headrest
Vinyl, Less Under Seat Storage Compartment
Additional Pricing
142. Federal Excise Tax Item Final FET to be determined at time of invoicing.
Miscellaneous
143. Standard Altec Warranty One (1) year parts warranty One (1) year labor warranty Ninety 1
(90) days warranty for travel charges Limited Lifetime Structural Warranty
Trade -In
144. Trade-in #1 1 -$30,000.0
0
Total 316,763.00
Altec Industries, Inc.
BY
Scott Kamler
Notes:
1 Altec Standard Warranty:
One (1) year parts warranty.
One (1) year labor warranty.
Ninety (90) days warranty for travel charges.
Warranty on structural integrity of the following major components is to be warranted for so long as the
initial purchaser owns the product: Booms, boom articulation links, hydraulic cylinder structures, outrigger
weldments, pedestals, subbases and turntables.
Bidder is to supply a self-directed, computer based training (CBT) program. This program will provide
basic instruction in the safe operation of this aerial device. This program will also include and explain ANSI
and OSHA requirements related to the proper use and operation of this unit.
Altec offers its standard limited warranty with the Altec supplied components which make up the Altec Unit
and its installation, but expressly disclaims any and all warranties, liabilities, and responsibilities, including
We Wish To Thank You For Giving Us The Pleasure
And Opportunity of Serving You Page 9 of 10
UTILITY EQUIPMENT AND BODIES SINCE 1929
ra='J)VtW Quote Number: 233757 -1
Wou® Altec, Inc.
any implied warranties of fitness for a particular purpose and merchantability, for any customer supplied
parts
Altec designs and manufactures to applicable Federal Motor Vehicle Safety and DOT standards
2 Unless otherwise noted, all measurements used in this quote are based on a 40 inch (1016mm) chassis
frame height and standard cab height for standard configurations.
3 F.O.B. - Customer Site
4 Changes made to this order may affect whether or not this vehicle is subject to F.E.T. A review will be
made at the time of invoicing and any applicable F.E.T. will be added to the invoice amount.
5 Price does not reflect any local, state or Federal Excise Taxes (F.E.T). The quote also does not reflect any
local title or licensing fees. All appropriate taxes will be added to the final price in accordance with
regulations in effect at time of invoicing.
6 Terms: If chassis is ordered through ALTEC Industries, Inc. the chassis payment is due upon receipt of the
chassis at ALTEC Industries, Inc. Balance is due NET 30 days after receipt of completed unit. Interest
charge of 1/2% per month to be added for late payment.
7 Interest charge of 1/2% per month to be added for late payment.
8 Delivery: 260-280 ARO days after receipt of order PROVIDING:
A. Order is received within 14 days from the date of the quote. If initial timeframe expires, please contact
your Altec representative for an updated delivery commitment.
B. Chassis is received a minimum of sixty (60) days before scheduled delivery.
C. Customer approval drawings are returned by requested date.
D. Customer supplied accessories are received by date necessary for compliance with scheduled delivery.
E. Customer expectations are accurately captured prior to releasing the order. Unexpected additions or
changes made at a customer inspection will delay the delivery of the vehicle.
Altec reserves the right to change suppliers in order to meet customer delivery requirements, unless
specifically identified, by the customer, during the quote and or ordering process.
9 Trade-in offer is contingent upon equipment being maintained to DOT (Department of Transportation)
operating and safety standards. This will include, but not limited to tires, lights, brakes, glass, etc. If a
trade-in is not maintained to DOT standards, additional transportation expenses will apply and could be
invoiced separately.
All equipment, i.e., jibs, winches, pintle hooks, trailer connectors, etc., are to remain with the vehicle unless
otherwise agreed upon in writing by both parties. Altec Industries reserves the right to re -negotiate its
trade-in offer if these conditions are not met.
Customer may exercise the option to rescind this agreement in writing within sixty (60) days after receipt of
purchase order. After that time Altec Industries will expect receipt of trade-in vehicle upon delivery of new
equipment as part of the terms of the purchase order.
Titles for trade-in equipment should be given to the appropriate Altec Sales associate or forwarded to Altec
Nueco at address 1730 Vanderbilt Road, Birmingham, AL 35234.
10 This quotation is valid until NOV 26, 2013. After this date, please contact Altec Industries, Inc. for a
possible extension.
11 After the initial warranty period, Altec Industries, Inc. offers mobile service units, in -shop service and same
day parts shipments on most parts from service locations nationwide at an additional competitive labor and
parts rate. Call 877-GO-ALTEC for all of your Parts and Service needs.
12 Please email Altec Capital at finance@altec.com or call 888-408-8148 for a lease quote today.
13 Please direct all questions to Don Hildebrandt at (816) 364-2244
We Wish To Thank You For Giving Us The Pleasure
And Opportunity of Serving You Page 10 of 10
UTILITY EQUIPMENT AND BODIES SINCE 1929